 |
| Quantity: | |
|---|---|
DFM
HEE
DFM TURN CLAMP
| Model | WLL(T) | Jaw opening(mm) | Weight(kg) |
| DFM1 | 1.0 | 0-15 | 2.7 |
| DFM2 | 2.0 | 0-20 | 5.6 |
| DFM3 | 3.0 | 0-30 | 8 |
| DFM5 | 5.0 | 0-50 | 13.4 |
| DFM10 | 10.0 | 0-80 | 26 |
DETAIL
For lifting and turn steel plate.
From a mechanics point of view, these clamps have ideal designs, which are compact, lightweight, easy to use.
The main body and parts are made from die-forge special alloy steels, whichare optimally tempered for maximum strength and duraility.
The working load limited is applied one piece, during lifting single could be in use for horizonal lifting and transport.
 |  |
DFM TURN CLAMP
| Model | WLL(T) | Jaw opening(mm) | Weight(kg) |
| DFM1 | 1.0 | 0-15 | 2.7 |
| DFM2 | 2.0 | 0-20 | 5.6 |
| DFM3 | 3.0 | 0-30 | 8 |
| DFM5 | 5.0 | 0-50 | 13.4 |
| DFM10 | 10.0 | 0-80 | 26 |
DETAIL
For lifting and turn steel plate.
From a mechanics point of view, these clamps have ideal designs, which are compact, lightweight, easy to use.
The main body and parts are made from die-forge special alloy steels, whichare optimally tempered for maximum strength and duraility.
The working load limited is applied one piece, during lifting single could be in use for horizonal lifting and transport.
| |
